CONCRETE CURING COMPOUND

SCOPE OF WORK

Application of curing compound onto fresh concrete surface

GENERAL PURPOSE OF CURING COMPOUNDS FOR FRESH CONCRETE

• To form a film covering the surface of concrete to prevent premature water loss due to evaporation

• Allow the concrete to cure with complete hydration of cement and achieve maximum properties.

MATERIALS AVAILABLE FOR CONCRETE CURING

ANTISOL E

• Emulsified paraffin based curing compound.
• Ready to use
• Very effective particularly on horizontal surfaces even subject to windy and sunny conditions
• Shall be removed prior application of subsequent surface treatment

ANTISOL S

• Aqueous concrete curing silicate solution
• Ready to use
• Particularly used for the treatment of vertical concrete surface
• Does not impair adhesion of subsequent treatments to concrete surface (when applied within recommended dosage rates)

COMPOUND  APPLICATION PROCEDURE

Please consult our product technical data sheets for full application recommendations.

• Applicable by spray.
• Typical Consumption rate: 0.2 to 0.25 litre of Antisol E or Antisol S per m2.
• Protect fresh coat from rain