![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiVoFLp9RnLcYiRjsNlHnDLH1ZdArpGVqvXcYxheh-5yrHso53sGIg8z7MLQwZNKxSmtw_cp_Uc0_kDTwZWNxDYwLRMIPheP_ZjGEwyWgW6nmxmYJjYH2DLdvJWV1prZmcmVjTO60b_IEtC/s640/13+IMPORTANT+POINTS+FOR+CIVIL-SITE+ENGINEER+ALWAYS+REMEMBER+ON+SITE.jpg)
IMPORTANT POINTS:
- Lapping is not allowed for the bars having diameter more than 36 mm.
- For dowels rod minimum of 12 mm diameter should be used.
- Free fall of concrete is allowed maximum to 1.50 meter.
- Minimum bar in square column is 4 number and 6 number in circular column.
- Main bars in slab not less than 8 mm if you are using(HYSD) or 10 mm if you are using(Plain bars) and the distribution bars was not less than 8 mm in a diameter and not be more than 1/8 of the given slab thickness.
- Longitudinal reinforcement not less than 0.8% and more than 6 %.
- In steel reinforcement binder wire required is 8 kg per MT (Metric ton).
- Minimum thickness of slab is 125 mm.
- Dimension tolerance for cubes ±2 mm.
- Compressive strength of brick is 3.5 N/mm^2.
- Water absorption of brick is between 15% to 20%.
- PH (Power of Hydrogen) value of the water should not be less than 6.
- In soil filling as per IS codes 100 square meter should take 3 sample for core cutting test.
0 comments:
Post a Comment